Extron electronics RGB 302 User Manual page 16

im Vertrieb von
Chapter 2 • Installing the RGB 302/304
____ The Extron RGB 302/304 automatically detects which
cables are connected and sends sync signals to the
correct output.
4. Connect the Analog/ECL MBC video cable from the
ANALOG/ECL
INPUT
____ If a Laptop Breakout Cable (LBC) is being used, set
DIP Switch 3 to Off. Refer to "Rear Panel DIP Switch
Settings" in the next section.
5. RS-232 Control (optional) — If using a PC or other
RS-232
6. Turn power On at the local computer monitor. Next,
7. Observe that the RGB 302/304 LCD display lights up
www.camboard.de
Extron RGB 302/304 Universal Interface • User's Manual
CAMBOARD Electronics
computer (Power PC, PC, Mac, or workstation) to
the Analog/ECL Input connector on the RGB 302/
304 and to the local monitor. See note below.
4a. MBC Power Connector — If an MBC buffer is
being used, plug the phone jack into the MBC
power female connector of the RGB 302/304.
system to control the RGB 302/304, connect the
cable here (pinouts and interface specifications are
given under the section "Installation Check" later in
this chapter).
turn power On at the computer supplying the video
input — (Power PC, PC, Mac or workstation).
6a. Turn power On at the data monitor/projector.
6b. Connect power to the RGB 302/304.
and cycles through the three default menus (below).
7a. The ID or Title Menu - Displays the name of
the unit. To change this display, see "Editing
the ID Screen" in Chapter 3.
7b. The Scan Rate Menu - From the monitor
breakout cable, the RGB 302/304 detects
the scan rate frequencies and displays
them. The scan rate display on the left is an
example.
7c. The Sync Output-Memory Cycling Menu -
As an example, if the RGB 302/304 has
detected an output with sync on Green and
Memory Cycling is turned On, the first line
will display "Sync Out: Green" and the
second line will display "Mem Cycling: On" .
Refer to the "Memory Cycling Feature"
section in this chapter for a detailed
explanation of Memory Cycling.
Tel. 07131 911201 ce-info@camboard.de
Fax 07131 911203
Page 2-2