Master Reset; Diagnostics - Pentair INTELLIWATER PNR-POE1-XTR3-01 Installation And Operation Manual

MASTER RESET

Press the button while in the Master Settings main screen to display the Reset screen.
Press the factory button to reset all control parameters to their factory defaults, or press the non-factory button to reset control
parameters to previously saved custom settings (see "NON-FACTORY SETTINGS" on page 49). A warning screen appears before param-
eters are reset. Press to confirm the reset or press

DIAGNOSTICS

The control records and displays a variety of diagnostic data to assist with troubleshooting performance issues and fine-tuning system
efficiency. Press the Diagnostics button
• Press the screen navigation arrows at the upper-right and left of the screen to view each diagnostic parameter.
• Press the Error Log button
button again on the Clear All Error Logs screen, then enter "1201" at the password prompt screen, then press the Accept button to
confirm.
54 • PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
to return to Master Settings.
from the Master Settings or Home screens to view the Diagnostic screen.
to access the Error Log screen. To clear the Error Log, press the Reset button then the Reset