Master Programming Mode Flow Chart - Pentair Fleck 7000 NXT Service Manual

MASTER PROGRAMMING MODE FLOW
CHART
Before entering Master Programming, please
CAUTION
contact your local professional water dealer.
NOTE: Depending on current option settings, some displays
cannot be viewed or set.
Entering Master Programming Mode
1. Press and hold the Shift and Up buttons for 5 seconds.
Press the Extra Cycle button once per display until all
displays are viewed and Normal Display is resumed. Option
setting displays may be changed as required by pressing
either Up or Down button. Use the Shift button to move one
space to the left.
2. Depending on current valve programming, certain displays
may not be viewed or set.
NOTE: If the "D" button is pressed while in master
programming, no changes will be saved.
Options: English
Spanish
Options: System 4 (single unit)
System 5 (2-4 units)
System 6 (2-4 units)
System 7 (2 units)
System 9 (2-4 units)
Options: Valve Address #1 (First Control Valve)
Valve Address #2 (Second Control Valve) (Default)
Valve Address #3 (Third Control Valve)
Valve Address #4 (Fourth Control Valve)
NOTE: This screen will not display for System Type 4.
Options: 2 Valves in the System (Default)
3 Valves in the System
4 Valves in the System
Range: 2 to 4 Valves in the System
NOTE: This screen will not display for System Type 4.
Options: Time Clock Delayed (System 4 Only) (Default)
Meter Immediate (All System Types)
Meter Delayed Fixed Reserve (Systems 4 & 6 Only)
Options: Downflow (Default)
Downflow Fill First
Filter
Iron Filter (Do Not Use)
Options: 00:06:00 (Default)
Range: 1 second to 99 minutes (1 hour, 39 minutes)
Options: U.S. - Gallons (Default)
European Units - Liters (Metric)
NOTE: In U.S. - Gallons mode, the display will be in 12-hour time.
NOTE: In European Units - Liters (Metric) mode, the display will be in
24-hour time.
Example:
English
Example:
System Type 4, Single Unit
Example:
Valve Address #2 (Second Control Valve) (Default)
Example:
2 Valves in the System (Default)
Example:
Time Clock Delayed (Default)
Example:
Downflow (Default)
Example:
00:06:00 (Default)
(Hours:Minutes:Seconds)
Example:
U.S. Gallons (Default)
Example:
Grains (Default)
Filter
Iron Filter (Do Not Use)
Example:
00:06:00 (Default)
(Hours:Minutes:Seconds)
Options: 00:06:00 (Default)
Range: 1 second to 99 minutes (1 hour, 39 minutes)
Example:
U.S. Gallons (Default)
Options: U.S. - Gallons (Default)
European Units - Liters (Metric)
NOTE: In U.S. - Gallons mode, the display will be in 12-hour time.
NOTE: In European Units - Liters (Metric) mode, the display will be in
24-hour time.
Example:
Grains (Default)
Options: Grains (in U.S. Format) (Default)
Grams (in Metric Format)
Range: 9,000 to 9,900,000 Grain Capacity in U.S. Format
90.0 to 190,000 grams CaCO Capacity in Metric Format
3
Example:
00% (Default)
Range: 0 to 50%
NOTE: Use the Shift button to move to the left.
Example:
15 GPG (U.S. Format) (Default)
Range: 1 to 199 Grains/Gallon (U.S. Format)
2 to 199 miligrams CaCO /L (Metric Format)
s
NOTE: Use the Shift button to move to the left.
NOTE: This screen will only display on the lead unit for System Types 6 & 7.
For all other System Types, it will display for all units.
Example:
Off (Default)
Example:
1 Day
Options: Off (Default) or On
Range: 1 to 99 Days
Example:
2:00 A.M. (Default)
Options: A.M. (U.S. Format)
HR (Metric Format)
NOTE: Regeneration time will not appear unless Regeneration Day Override
is on.
Example:
Cycle 1 in Back Wash Mode
Options: Regeneration Cycle Step #1
Regeneration Cycle Step #2
Regeneration Cycle Step #3
Regeneration Cycle Step #4
Regeneration Cycle Step #5
Regeneration Cycle Step #6
NOTE: Please refer to the "Regenerant Flow Default Cycle Steps & Times"
in the Master Programming Mode section of the manual.
NOTE: If Stager is chosen for Valve Type, the Regeneration Cycle Step
description will not display.
Example:
Auxiliary Relay is Disabled
Options: Enabled
Disabled (Default)
Example:
Auxiliary Relay Output in Start 1 at
0 hours, 0 minutes, & 0 seconds
Range: 00:00:00 to 18:00:00
NOTE: Only displayed if Auxiliary Relay is enabled in previous screen.
Auxiliary Relay will only display if Chemical Pump is OFF for System
Types 6 & 7.
Example:
Auxiliary Relay Output in End 1 at
0 hours, 0 minutes, & 0 seconds
FLECK 7000 NXT Service Manual • 9
Range: 00:00:00 to 18:00:00
Example: