Table of Contents
Advertisement
6.3.
Master setting programming
Note
If a regeneration is scheduled to occur while in master settings, the scheduled regeneration
will start as soon as exiting the master setting.
Note
Due to the complexity of these settings and the potential for errors, master settings should
only be accessed by your local water professional.
Caution
Improperly adjusting master settings may cause the system to operate incorrectly. Before
entering master settings please contact your professional water dealer.
The following is a detailed overview of settings available in Master Settings. Please see 6.3.2. Master
setting reference chart, page 67 for the complete set of values and ranges available to program while
in master settings.
6.3.1. Master setting screens
The master settings screens include all configurable parameters available in the controller.
From the settings screen, press the settings button
Press
to continue to the password screen or press
The Password screen displays a numeric keypad:
Ref. MKT-IM-019 / E - 14.10.2019
Installer Manual Fleck 5812 - XTR - Programming
Master Settings
before entering
master programming
please contact your local
water professional
Password
1201
1
2
3
4
7
8
9
0
. A warning message appears:
to return to the home screen.
5
6
65 / 132
Advertisement
Table of Contents
