Reserve Capacity (Rc) Or (Sf); Current Day Of The Week (Cd); Master Programming Mode; Master Programming Mode Chart - Pentair FLECK 5600 SXT Installer Manual

6.4.4. Reserve capacity (RC) or (SF)

Determine the reserve capacity in litre or in percentage.
K Adjust the reserve capacity with
L Press to validate the selection and advance to the next parameter.

6.4.5. Current day of the week (CD)

Determine the day of regeneration.
Note
Appears only if the softener is set to "weekly time clock".
Note
1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday
and 7 for Sunday.
M Adjust the day of the week with
N Press to validate the selection and exit the basic programming mode.
6.5.

Master programming mode

Note
As soon as programming mode is entered, all parameters can be displayed or set to suit the
needs. Depending on the current programming, some functions will not be displayed or will
not be changeable.
Note
If no button is pressed for 5 minutes in the Programming mode (basic or master mode), the
controller returns to Service mode and changes made are not saved.
Note
Menus are displayed in a defined and incremental order.
Mandatory
In order to save the new settings in the programming mode, it is necessary to go through all
the parameters.

6.5.1. Master programming mode chart

Parameter
DF Display format
Ref. MKT-IM-013 / A - 21.12.2016
Installer Manual Fleck 5600 - SXT - Programming
and .
and .
Options Definition
GAL US units
Ltr Metric units
Note
49 / 92