Master Programming Mode Chart - Pentair 5600SXT Service Manual

Master Programming Mode Chart

Abbreviation
DF Display Format
VT Valve Type
CT Control Type
Number of Tanks
NT
Tank in Service
TS
C Unit Capacity
Feedwater
H
Hardness
RS Reserve Selection
SF Safety Factor
Fixed Reserve
RC
Capacity
DO Day Override
RT Regen Time
BW, BD, RR, Regen Cycle Step
BF Times
D1, D2, D3, D4, Day of Week
D5, D6, & D7 Settings
CD Current Day
CAUTION: Before entering Master Programming, please contact your local professional water dealer.
Page 10
Master Programming Options
Parameter Option
Abbreviation
GAL
St1b
St2b
UFbF
Othr
dAY
Gallons
Ltr Liters
Cu Cubic Meters
Standard Downflow/Upflow Single Backwash
Standard Downflow/Upflow Double Backwash
Fltr Filter
Upflow Brine First
Other
Fd Meter (Flow) Delayed
FI Meter (Flow) Immediate
tc Time Clock
Day of Week
Single Tank System
1
Two Tank System
2
U1 Tank 1 in Service
U2 Tank 2 in Service
Unit Capacity (Grains)
Hardness of Inlet Water
SF Percentage Safety Factor
rc Fixed Reserve Capacity
Percentage of the system capacity to be used as a
reserve
Fixed volume to be used as a reserve
The system's day override setting
The time of day the system will regenerate
The time duration for each regeneration step. Adjust-
able from OFF and 0-199 minutes..
NOTE: If "Othr" is chosen under "Valve Type", then
R1, R2, R3, etc, will be displayed instead
Regeneration setting (On or OFF) for each day of the
week on day-of-week systems
The Current day of the week
Options