Fig. 4: Example Of Low-Battery Alarm - Fluidwell F Series Operation Manual

Page 8
•
Clear total
The value for total can be re-initialized. To do so, press CLEAR twice. After pressing CLEAR
once, the flashing text "PUSH CLEAR" is displayed. To avoid re-initialization at this stage, press
another key than CLEAR or wait for 20 seconds.
Re-initialization of total DOES NOT influence the accumulated total.
•
Display accumulated total
When the SELECT-key is pressed, total and accumulated total are displayed. The accumulated
total cannot be re-initialized. The value will count up to 99,999,999,999. The unit and number of
decimals are displayed according to the configuration settings for total.
•
Low-battery alarm
When the battery voltage drops, it must be replaced. At first "low-battery" will flash, but as soon
as it is displayed continuously, the battery MUST be replaced shortly after!
The remaining lifetime after the first moment of indication is generally several days up to some
weeks. See paragraph 6.3 for further information on battery replacement.
•
Alarm 01-03
When "alarm" is displayed, please consult Appendix B: problem solving.

Fig. 4: Example of low-battery alarm.

FW-F016-P-M_v0404_01_EN.docx