Changing The Input Tray Settings - AGFA Drystar 5301 Reference Manual

28 | Drystar 5301, Drystar 5302 | Advanced Operation (key-operator mode)

Changing the input tray settings

Changing the film view
1. On the Change settings menu, press the Down key once to change the
upper tray settings, twice to change the lower tray settings, followed by the
Confirm key'.
The 'Input tray' screen is displayed:
2. Press the Confirm key to select 'Film view'.
The 'Film view' screen is displayed:
The currently active film view is marked with a '*'.
3. Press the up/down arrow keys to select the film view.
4. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Accessing the Change settings menu
2830F EN 20210520 0952
Note:
In this manual, we always will elaborate a case for the lower
tray. The procedures of showing the settings are identical for the
upper tray.
On the Show settings menu, press the Down key once to see the
upper tray settings, twice to see the lower tray settings.
on page 23