4.1 Daily maintenance
Disconnect the power source from the mains before handling electrical cables.
Welding machine maintenance
Follow these maintenance procedures to maintain the proper functioning of the welding machine:
•
Check that all covers and components are intact.
•
Check all the cables and connectors. Do not use them if they are damaged and contact service for replacements.
•
Check the wire feed rolls and the pressure handle. Clean and lubricate with a small quantity of light machine oil if
needed.
For repairs, contact Kemppi at
Welding gun maintenance
For Flexlite GX MIG gun instructions, refer to userdoc.kemppi.com.
© Kemppi
www.kemppi.com
or your dealer.
54
MasterMig 353, 355
Operating manual- EN
1921960 / 2217