Ontrol Panel; Key Explanation - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

6
Model 4021, 4022 Control Panel
Strap

Key Explanation

Key
RESET
DENSITY
STRAP
SD
SPEED
ADD
Density
Count
Add
This key is used when clearing counts and to restart the machine after a stopping
condition.
This key is used for setting doubles detection sensitivity by denomination.
This key is used for setting a Strap Limit at any preset value (5, 10, 20, 25, 50,
75, 100 or infinity). This key is also used to set strap values at levels other than
the preset values (i.e., 53, 79, etc.)
This key is used to activate suspect document detection and set sensitivity by
denomination.
This key is used to set speed at
This key is used for accumulating a total even after notes have been removed
from the stacker. When disabled, totals clear each time the stacker is emptied.
JetCount ®
Denomination
Speed
SD
Description
*
(low),
Currency Counter
All Models
RESET DNSTY
SD SPEED
** ***
(medium) or (high).
STRAP
ADD