Key Explanation - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

8
Strap
$1

Key Explanation

Key
RESET
DENSITY
STRAP
SD
SPEED
ADD
DENOM
VALUE
Direct Access Denomination Keys
Density
Count
Add
$5 $10 $20
This key is used when clearing counts and restarts the machine after a stopping
condition.
This key is used for setting doubles detection sensitivity by denomination.
This key is used for setting a Strap Limit at any preset value (5, 10, 20, 25, 50,
75, 100 or infinity). This key is also used to set strap values at levels other than
the preset values (i.e., 53, 79, etc.)
For models equipped with Magnetic SD (JetCount model 4021) or Magnetic and
UV/FL SD (JetCount model 4022), this key is used to activate suspect document
detection and set sensitivity by denomination.
This key is used to set speed at
This key is used for accumulating a total even after notes have been removed
from the stacker. When disabled, totals clear each time the stacker is emptied.
This key is used to select the denomination that will be used to count currency.
This key is used to toggle between count and note values.
JetCount ® Currency Counter
Denomination
Speed
SD
$50 $100
Description
* **
(low), (medium) or
All Models
RESET DNSTY STRAP
SD SPEED ADD
$2 DENOM VALUE
***
(high).