Table of Contents
Advertisement
16
Count mode counts any currency, food stamps, etc., that fit the hopper size. In this mode, JetCount is
only counting "slips of paper" (no currency scanning is taking place). Therefore, the COUNT total
reflects the number of pieces.
When the ADD function is ON, JetCount will accumulate totals until RESET is pressed to clear count
totals. When the ADD function is OFF, the machine will clear totals each time the stacker is emptied.
Machine is auto-start capable. Feed rollers in hopper rotate inward.
Entanglement and drawing-in hazard.
Do not operate with exposed long hair, neckties, jewelry or loose clothing.
Processing Documents
By default the display shows:
Make sure that all notes are stacked neatly. Place the new stack of notes in the hopper. The
machine will begin counting.
JetCount may stop if one of the following conditions occurs: JAM, CHAIN, DOUBLE,
SUSPECT DOCUMENT and STRAP LIMIT. (See
instructions on clearing the condition indicated on the screen.)
JetCount will time out and stop automatically within two seconds when all documents have
been run.
How to Use Count Mode
Strap
100
JetCount
®
Currency Counter
Density
Denomination
* *
COUNT
0
* *
Count
Stopping Conditions and Recovery Steps
All Models
Speed
for
Hide quick links:
Advertisement
Table of Contents
