Batch Accumulation, Add Key On - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

18
In this case, the display reads:
Removing notes from the stacker resets the Batch count to zero and, if a printer is enabled, a
Batch Report automatically prints. Reaching a Strap Limit also resets the Batch count to zero.
Batch counts may be manually reset to zero by pressing RESET.

Batch Accumulation, ADD Key ON

With the ADD function ON, JetCount will accumulate totals until RESET is pressed. Press the
ADD key, and the indicator light above the ADD label will light. Operating in COUNT mode
with the ADD key ON produces this screen when 45 coupons are processed
The number below the Strap label is the current Strap Limit. The coupons may be left in the
stacker or removed. The Batch count will remain. Another 55 coupons are run. The machine will
"time out" showing a strap limit has been reached:
The hopper is empty and the machine is in a normal "time-out" condition. When the next Batch
is run, the Batch count will remain at 100 and accumulate from that count.
Strap
100
Strap
100
Strap
STRAP LIMIT
100 PIECES
JetCount ® Currency Counter
Density Denomination
* * COUNT
100 * *
Count
Density Denomination
* * COUNT
45 * *
Count
Density Denomination
Count
All Models
Speed
.
Speed
Speed