Comm Report; Options; Sd Function Control - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

Comm Report

This field enables Normal Communications Report format or Wedge Communications Report
format. When connected to the Cummins Allison Software Wedge, be sure to set Port 1 or Port 2
to standard computer interface (COMP) and COMM Report to "Wedge." In all other
circumstances, set COMM Report to "Normal."

Options

The magnetic head function (MAG) or UV Option (includes UV and FL) for suspect document
detection can be enabled if the magnetic head and UV are installed, otherwise it should be
disabled. For JetCount model 4020, both MAG and UV should be disabled. For JetCount model
4021, UV should be disabled

SD Function Control

Enables or disables the ability to view and change SD sensitivity settings during normal
operation. Key Status and Options affect this feature. Please refer to the following chart.
(For information on how to handle a suspect document during processing, see
Conditions and Recovery
Key Lockout
SD MAG UV
OFF ON/OFF
ON ON
ON OFF/ON
Steps.)
Option
SD Function
Control
MAG UV
ON ON
ON OFF
OFF/ON ON
© 2012 Cummins-Allison Corp.
Results
• SD is locked ON or OFF.
• If SD is locked ON, cannot change sensitivity
level of Hi-Med-Low. Able to view, but not
change sensitivity settings.
• If SD is locked OFF, cannot view or change
sensitivity settings.
• SD key is locked ON or OFF.
• If SD is locked ON, Hi-Med-Low level can be
changed and sensitivity settings can be
changed.
• If SD is locked OFF, cannot view or change
sensitivity settings.
• If Mag or UV Option is OFF, Key Lockout for that
option is automatically set to OFF. However, if
the Option is changed to ON, Key Lockout will
not revert to the ON setting.
• If Option is set to OFF, cannot change or view
sensitivity settings for that option.
• If Option is set to ON, can view and change
sensitivity settings.
29
Stopping