Direct Access Strapping; Batch Accumulation, Add Key Off - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

Direct Access Strapping

The optional Direct Access Strapping keys give the operator direct access to preset strap
limits. Without this option, straps may be set by pressing STRAP and scrolling to a preset
value or holding down STRAP for other values. Pressing a Strap key of 50 would produce
this screen:
Strap
50

Batch Accumulation, ADD Key OFF

When processing documents with the ADD function OFF, the machine will clear the current
count total and generate a print report (if a printer is connected) each time the stacker is emptied.
Operating in COUNT mode with the ADD key OFF produces this screen when 45 coupons are
processed:
Strap
100
The number below the Strap label is the current Strap Limit. If the notes are left in the stacker,
then the next run will be added to the Count. If the notes are removed from the stacker, then the
next run will restart from zero
Assume that the notes were left in the stacker, and another 55 had been run. The machine will
"time out" showing a Strap Limit has been reached.
Strap
Once notes are removed from the stacker, the machine automatically resumes counting until it
either counts all the notes in the hopper or reaches another Strap Limit.
Density
* *
0
Count
Density
* *
45
Count
Density
STRAP LIMIT
100 PIECES
Count
© 2012 Cummins-Allison Corp.
Denomination
COUNT
* *
Speed
Denomination
COUNT
* *
Speed
Denomination
Speed
17