Batch Accumulation, Add Key On - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

22
The $150 appearing at the center of the bottom line of the display is the total of all $1s and $5s
processed to this point. Continuing with the $10 notes, the screen reads:
Again, the bottom line of the display is the total notes processed to this point (assuming the notes
were not removed from the stacker). The total of the currency is $230. This total will remain
until the next group of notes is processed, at which time the count is reset to zero.

Batch Accumulation, ADD Key ON

As in the previous example, the operator has a group of notes consisting of $1s, $5s and $10s
that will be processed with the ADD key ON. First, the notes are separated by denomination.
Then, the DENOM key or Direct Access key is used to select $1. Processing the $1 notes
will produce a screen similar to the following:
The operator may remove the notes from the stacker. The count total will resume at $30 with the
next note count.
Strap
100
Strap
100
Strap
100
JetCount ® Currency Counter
Density Denomination
* * $5
$150 * *
Count
Density Denomination
* * $10
$230 * *
Count
Density Denomination
* * $1
$30 * *
Count
All Models
Speed
Speed
Speed