Safety Messages And Advisories; Terms - CUMMINS ALLISON JetCount 4020 Operating Instructions Manual

Glossary

Safety Messages and Advisories

Icon

Terms

Term
Batch
Chains
Count Processing
(COUNT) Mode
Currency Processing
(VALUE) Mode
Default
Display
Doubles
Warning indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
Caution indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
Notice is used to address practices not related to physical injury. In this manual,
notice indicates a situation which, if not avoided, could result in property
damage.
Stop highlights a situation where an incorrect action or sequence of actions
could lead to lost or inaccurate data, operation in an incorrect mode, or
unintended outcomes in machine function.
Note highlights information that is interesting or useful to know after
completing a procedure.
Documents processed as an overall group. Documents will be recorded as
coming from one general source.
A condition that occurs when two or more documents run through the JetCount
reading mechanism without proper spacing.
Counts any currency, food stamps, coupons, etc., that fit the hopper size.
Operates like any other currency counter in that it is only counting "slips of
paper" (no currency scanning takes place).
The DENOM or Direct Access Denomination keys permit setting the JetCount so
that each note passing through the machine is counted as if it were a specific
value of currency.
Conditions of operation that are either established during the setup process
(which remain unchanged until reset) or have been incorporated into JetCount
during manufacturing (to which the machine returns each time it is turned OFF,
then ON).
The Vacuum Fluorescent Display screen on the front of the machine reports the
operating status.
A condition that occurs when two documents pass through the JetCount reading
mechanism simultaneously — stacked one on top of the other. The machine will
stop when this condition occurs.
© 2012 Cummins-Allison Corp.
Definition
Definition
39