Table A-6. V.35 Connector Pinout; Table A-7. 10/100Baset Ethernet 0/1 Port Pinout - ADTRAN NetVanta 900 Series Hardware Installation Manual

NetVanta 950 IAD

Table A-6. V.35 Connector Pinout

Pin CCITT/V.24
A 101
B 102
C 105
D 106
E 107
F 109
H 108/2
J 125
R 104
T 104
V 115
X 115
P 103
S 103
Y 114
AA 114
U 113
W 113
NN 142
Ethernet Switch Module Pinout

Table A-7. 10/100BaseT Ethernet 0/1 Port Pinout

Pin Name
1 TX1
2 TX2
3 RX1
4,5 —
6 RX2
7,8 —
61200788L1-34B
Description
Protective Ground (PG)
Signal Ground (SG)
Request to Send (RTS) from DTE
Clear to Send (CTS) to DTE
Data Set Ready (DSR) to DTE
Received Line Signal Detector (DCD) to DTE
Data Terminal Ready (DTR) from DTE
Ring Indicator (RI) to DTE
Received Date (RD-A) to DTE
Received Data (RD-B) to DTE
RX Clock (RC-A) to DTE
RX Clock (RC-B) to DTE
Transmitted Data (TD-A) from DTE
Transmitted Data (TD-B) from DTE
TX Clock (TC-A) to DTE
TX Clock (TC-B) to DTE
External TX Clock (ETC-A) from DTE
External TX Clock (ETC-B) from DTE
Test Mode (TM) to DTE
Description
Transmit Positive
Transmit Negative
Receive Positive
UNUSED
Receive Negative
UNUSED
© 2004 ADTRAN, Inc.
Hardware Installation Guide, Appendix A
37