温度 Temp; 转速 Speed; 加漂洗 Rinse; 预约 Delay - Galanz XQG90-T514VE Service Manual

XYJGT90100TVE-001
runs at a lower speed during dehydration.
5.3.3 温度 Temp
在程序启动前按下"温度"按键，可选择不同的程序洗涤温度，部分程序温度不可选。
Press this button repeatedly to change the wash temperature. But some program temperatures are
not optional.
5.3.4 转速 Speed
按压此按键可以选择不同的脱水转速。
Press this button repeatedly to change the spin speed.
5.3.5 加漂洗 Rinse
按压此按键可以选择不同的漂洗次数。
Press this button repeatedly to change the rinse times.
5.3.6 预约 Delay
按压此按键可以预约洗衣机启动时间，预约时间为 1-24 小时。预约时间从按压启动按键后开始计算。
Press this button repeatedly to set the delay time of the starting of a wash cycle from 1 hour to 24
hours. The appointment time is calculated after pressing the "Start/Pause" button.
5.3.7 静音 Mute
静音功能可关闭所有提示音及报警音。
开启此功能：长按"温度"键 3 秒钟。
关闭此功能：再次长按"温度"键 3 秒钟。
The function of "Mute" is to close all the prompt tone and alert sounds.
How to start this function: Press the "Temp" button for 3 seconds.
How to cancel this function: Press the "Temp" button for 3 seconds again.
5.3.8 童锁 Child lock
为了防止洗衣机在洗衣过程中因儿童的误操作导致的不正常洗衣，可启动童锁功能：
1、同时按压"加漂洗"和"转速"按键 3 秒启动童锁功能，再次同时按压"加漂洗"和"转速"按键
3 秒即可取消童锁功能。当图标亮起时，童锁功能启动。此功能在洗涤周期中将一直执行。
2、当童锁功能工作时，除将程序旋钮旋至"OFF"位置关机外，所有按键将操作无效。
The function of "Child lock" is to lock the control panel to prevent the misuse by children.
1. Press the "Rinse+" and "Speed" buttons at the same time for 3 seconds to start the function; press
18