Guardian Fall Protection G-Lok Operation And Instruction Manual page 5

Unit in position.
insertion
Unit inserted.
Placement in Concrete
Push the unit downwards until the
Spring fully compresses. pushing on
Activator Cap will force the Toggle Bar
into open Position.
Removal
Grab the Hole Plug with one hand while
pushing downward on the Anchor Loop
with the other hand. Once the Hole Plug
fully compresses the Spring the unit will
be in the insertion position and ready to
pull out.
The Toggle Bar must be in
this parallel position when
inserting and removing the
unit.
Only when the unit is activated
in the open position is it safe
for load bearing.
5