Galanz XQG80-Q812DE After-Sales Service Manual page 24

XYJGT80QFSDE-001
◆During the execution of automatic detection mode: any button and knob will not respond, and the
exit mode is to turn off the power with the knob (position p00)
◆在检测模式中：
In the detection mode:
⇒ 以上测试旋钮位置可任意旋动，对应测试在按动启停键后立即有效；
the above test knob position can be rotated arbitrarily, and the corresponding test is effective
immediately after pressing the start stop key;
⇒ 每次测试前均需闭合门锁，否则门锁故障报警；
The door lock must be closed before each test, otherwise the door lock failure will alarm;
⇒ 各测试阶段均可回旋进行；
The test can be carried out in different stages;
⇒ 在此模式下，若旋钮不在以上测试位置，则无任何响应；
If the knob is not in the above test position in this mode, there is no response;
◆退出此模式关闭电源旋钮。
◆Exit this mode and turn off the power knob.
23