Table of Contents
Advertisement
All manuals and user guides at all-guides.com
2.2.4 Dielectric Strength Testing
Units which are to have dielectric strength testing (HIPOT testing) done in the field must have the
braided ground cable disconnected during the test. This is required in order to prevent the surge
suppression circuitry, which is connected to surge ground, from being activated.
Figure 7 - Dielectric Strength Testing
12
©
2007 RuggedCom Inc. All rights reserved
Rev101
Advertisement
Table of Contents
Need help?
Do you have a question about the RuggedSwitch RS900L and is the answer not in the manual?
Questions and answers