Fiber Optic Ethernet Port Specifications; Communication Standards; Table 13 - Fiber Optic Port Specifications; Table 14 - Communication Standard Compliance - RuggedCom RuggedSwitch RS900L Installation Manual

4.6 Fiber Optic Ethernet Port Specifications

Speed
Mode /
Standard
Connector
100Base-FX MM / ST
100Base-FX MM / SC
100Base-FX MM / LC
100Base-FX MM / MTRJ
100Base-FX SM / ST
100Base-FX SM / SC
100Base-FX SM / LC

Table 13 - Fiber Optic Port Specifications

NOTES:
1. Maximum segment length is dependent on factors such as fiber quality, and number of patches and splices.
Please consult RuggedCom sales associates when determining maximum segment distances.
2. To convert from average to peak add 3 dBm. To convert from peak to average, subtract 3 dBm.

4.7 Communication Standards

Protocol
Ethernet
VDSL

Table 14 - Communication Standard Compliance

©
2007 RuggedCom Inc. All rights reserved
All manuals and user guides at all-guides.com
Cable Tx Pwr
λ λ λ λ
Tx
Type 2 (dBm peak)
(nm)
µ µ µ µ m) (Min / Max)
(
1310 50/125 -15.7
1310 50/125 -16/-11
1310 50/125 -19 / -14
1310 50/125 -16/-11
1310 9/125 -15/-8
1310 9/125 -13/5
1310 9/125 -15/-8
ETSI TS 101 270-2 V1.1.1, ITU-T G.993.1, ANSI T1E1.4
22
Rx
Rx Saturation
3 Sensitivity
(dBm Peak)
(dBm Average) 3
-33.5
-33
-32
-33.5
-32
-31
-31
Standards
IEEE 802.3
Typical Power
Distance Budget
3
(km) 1 (dB)
-11 2 17
-11 2 17
-14 2 15
-11 2 17
-7 20 16.5
-4 20 20
-5 15 16.5
Rev101