Storing The E-Bike Battery And The Kiox Display - Urban Arrow Family User Manual

Image 33 : Changing the batteries of the Purion display
7 . 4

Storing the e-bike battery and the Kiox display

If you plan to park your bike for a longer period we advise you to do
the following:
● Charge the e-bike battery to approximately 60 % (3 to 4 LEDs
lit on the charge-control indicator 56 ).
● Take out the e-bike battery and take off the Kiox display. Store
them in a dry and safe place.
● Regularly recharge the battery of the Kiox display.
● Check the charge condition after 6 months. When only one
LED of the charge-control indicator lights up, recharge the
User manual
e-bike battery again to approx. 60 %.
● Don't connect the e-bike battery permanently to the charger.
● Don't store the e-bike battery on the bike.
● Store the e-bike battery in a dry, well-ventilated location.
Protect the battery against moisture and water. Under
unfavorable weather conditions, it is recommended e.g. to
remove the battery from the e-bike and store it in an enclosed
location until being used again.
2
When the e-bike battery is stored discharged (empty) for
longer periods, it can become damaged despite the low self-
discharging feature and the battery capacity may be strongly
reduced.
Activating and deactivating the storage mode of the Kiox display
The Kiox display has an energy-saving storage mode which
minimises the rate at which the internal battery discharges.
2
Setting to this mode erases the date and time.
Activating the storage mode of the Kiox display is done as follows:
1 . Press and hold the on/off button 82 of the display for at least
8 seconds.
2
If the display does not start when the on/off button 82 is
pressed briefl y, the display is in storage mode.
2
Should you perform this action if the display is, contrary to
expectations, already in storage mode, the display will reset
itself. The display will restart after approx. 5 seconds. If the
EN
49