Placing And Removing The E-Bike Battery From The Battery Cradle - Urban Arrow Family User Manual

therefor also the e-bike battery will shut down automatically
to save energy. The display will not be charged when the
e-bike battery is off.
2
To maximise the lifespan of the on-board computer's battery,
it should be recharged for one hour every three months.
2
If the internal battery of the Kiox display is not recharged,
the date and time will be retained for up to 6 months. When
the display is switched on again, the date and time will be
reset if a Bluetooth® connection to the Connect app has been
established and the smartphone has successfully identified
the current location via GPS (see paragraph 4.3.2 for more
information on the Connect app).
5.6.2 Placing and removing the e-bike battery from the battery
cradle
Inserting the e-bike battery is done as follows:
1. Press the on/off button 57 of the e-bike battery to switch off
the e-bike battery 58.
1
Sparks may be generated between the terminals of your
battery and ones of the holder when you don't switch off the
battery. These sparks may lead to injuries.
2. Check if the upper and lower battery holder 63 and 55 are
clean (no dirt or debris).
30 Urban Arrow Family
3. Place the key into the battery lock 62.
2
The battery lock uses the same key as the ring lock 54.
4. Unlock the battery lock by turning the key counter clockwise.
5. Place the battery with the contacts on the lower holder on the
e-bike (see image 17).
6. Tilt the battery into the top part of the battery holder until it
engages. The battery is now locked. See image 18 and 19 for a
correctly and incorrectly fitted battery.
2
You will hear a click when the battery is inserted correctly.
7. Check if the battery is tightly seated. There should be very
little play.
8. Remove the key from the battery lock.
2
Removing the key prevent the e-bike battery from being
removed by unauthorised persons when the e-bike is parked.