Turning The Bike Lights On And Off - Urban Arrow Family User Manual

Adjusting the kickstand when it has an incorrect position is done as
follows:
1. Lift the rear wheel to let the kickstand rotate freely. The
kickstand will automatically turn to its correct position.
2
If the kickstand doesn't turn to the correct position, there is
a mechanical problem. Contact your Urban Arrow dealer to
have it solved.
5.9

Turning the bike lights on and off

Your e-bike has a front and rear light. It is advised to have your
lights turned on at all times, also during the daytime. The increased
visibility to other traffic will increase your safety.
6
Never cover the reflectors or the lights during cycling. It can
cause poor visibility in traffic which may lead to collisions
and/or accidents. Always contact your Urban Arrow dealer
when one of the reflectors is missing to arrange replacement.
Always contact your Urban Arrow dealer when the lights stop
working or do not turn on using the described method.
2
Your lights will not turn off when the battery is empty.
They will continue to work for many hours after the electric
assistance stops. You will have enough time to get home
safely when the battery drains during a ride.
38 Urban Arrow Family
In this paragraph we explain how to turn on the lights. This depends
on the type of display on your bike.
Turning on the lights with the Kiox display is done as follows:
1. Press the on/off button 82 on the display to turn on the e-bike
(see paragraph 5.6.3 for the requirements).
2. Press the light button 79 to switch on the lights.
2
Switching the bike light on and off has no effect on the back
lighting of the display.
2
Contact your Urban Arrow dealer in case the front and rear
light don't turn on simultaneously or don't turn on at all.
There are multiple ways to turn off the lights when you have an
Kiox display. Turning off the lights with the Kiox display is done as
follows:
● Press the on/off button 82 on the display. The lighting symbol
74 will disappear from the display.
● Turn off the e-bike (see paragraph 5.6.3).
● Remove the display from the e-bike (see paragraph 5.6.1).
Turning on the lights with the Purion display is done as follows:
1. Press on/off button 122 to turn on the e-bike (see paragraph
5.6.3 for the requirements).
2. Press the + button 103 between 1 and 2.5 seconds to switch
on the lights. The lighting symbol 116 is displayed on the
display when the light is on.