Urban Arrow Family User Manual page 49

4 . Plug the charger plug 31 into the charge socket 59 on the
bottom part of the battery holder (see image 31 ).
5 . Plug the charger plug 35 of the power cord into the charger
socket 32 of the charger.
6 . Connect the mains cable of the battery charger to the mains
supply. The charging procedure will start.
Tip See below for more information on the charging status
and what to do after charging.
Image 31 : Plugging charger plug in charge socket on the bottom
part of the battery holder
Charging the e-bike battery after it has been removed from the
e-bike is done as follows:
1 . Place down the battery on a clean surface. In particular, avoid
User manual
soiling the charge socket and the contacts, e.g. by means of
sand or soil.
2 . Press the on/off button 57 to switch off the battery.
3 . Remove the battery from the holder (see paragraph 5 . 6 ).
4 . Insert the charger plug 31 of the battery charger into the
socket (see image 32 ) on the battery.
5 . Connect the mains cable of the battery charger to the mains
supply. The charging procedure will start.
Tip See below for more information on the charging status
and what to do after charging.
Image 32 : Plugging charger plug in charge socket on the battery
Charging state of the e-bike battery
The e-bike battery can be charged with or without the display.
When charging without the display, the charging procedure can be
observed on the battery charge-control indicator 56 . When charging
with the display the bars on the display show the progress as well.
EN
47