Configuration Of The Display; Configuration Of The Purion Display; Configuration Of The Kiox Display - Urban Arrow Family User Manual

Image 13 : Front light beam angle
4.3

Configuration of the display

Depending on the type of display on your bike there are different
configuration options. In this paragraph we explain the configuration
of the Kiox and Purion display.
User manual

4.3.1 Configuration of the Purion display

On the Purion display the values can be displayed either in
kilometres or miles. Switching between kilometres and miles (and
visa versa) is done as follows:
1. Press and hold the - button 102.
2. Press the on/off button 122 for less than 1 second. The
setting has been changed now.
The versions of the subsystems can be viewed on the Purion display.
Displaying the versions of the subsystems is done as follows:
1. Press the on/off button 122 to switch off the system.
2. Simultaneously press the + button 103 and the - button 102.
Keep the buttons pressed while performing the next step.
3. Press the on/off button for less than 1 second. The versions
of the subsystems are now displayed.

4.3.1 Configuration of the Kiox display

The following system settings can be changed in the menu Sys
settings on the Kiox display:
System settings Explanation
Brightness The brightness can be adjusted in steps
of 10% from 0-100%. When the Automatic
option is selected, the brightness
automatically adjusts to the ambient light.
Time The current time can be set here.
Date [DD.Mon.YYYY] The current date can be set here.
Time zone The correct time zone can be selected
here.
EN
23