Setting Up The Lights - Urban Arrow Family User Manual

Image 10 : Adjusting the stem angle
Image 11 : Stay within the range indicated on the side of the stem
22 Urban Arrow Family
Image 12 : Correct the brake lever angle for the different stem
positions
4 . 2

Setting up the lights

The rear light is fi xed in the correct position and does not need to
be adjusted. For optimal visibility the front light should be set up
correctly (see image 13 ). It can be tilted up and down. This allows
for the light beam to be projected closer or further away from the
bike. Ideally the beam should be aimed the furthest you can see it on
the ground.
6
Never set up the front light in such a way that the beam
is pointing upward. This can cause upcoming traffi c to
be blinded after which they may loose control over their
transportation device and cause an accident.