To Start/Stop Operation Mode And To Set The Temperature - Daikin FTXJ20A2V1BW User Reference Manual

5.3.1 To start/stop operation mode and to set the temperature

FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518786-9H – 2021.12
▪ Humidity sensor. Control the humidity by decreasing the humidity during cooling
process.
Operation mode
1 Press to enter the operation mode carousel menu. When
repeatedly, the mode will change as follows:
INFORMATION
▪
In the carousel menu, you can also navigate in both directions using
or and
▪
The carousel menu will always start with the currently active setting.
2 Press to start operation.
3 The home screen changes as follows and the Daikin eye indication lamp goes
ON.
Home screen when unit is ON during...
heating, cooling,
automatic operation
Temperature setpoint
4 Press or one or more times to lower or raise the temperature setpoint.
Cooling operation Heating operation Automatic
18~32°C 10~30°C
(a)
When using drying or fan only operation mode, you CANNOT adjust the temperature.
5 Press to stop operation.
Result: The home screen changes as follows and the Daikin eye indication lamp
goes OFF.
.
drying operation
operation
18~30°C
Home screen when the unit is OFF
5 Operation
|
is pressed
and
fan only operation
Drying or fan only
operation
(a)
No setpoint
User reference guide
33