Airflow Rate; To Adjust The Airflow Rate; Airflow Direction - Daikin FTXJ20A2V1BW User Reference Manual

5 | Operation

5.4 Airflow rate

5.4.1 To adjust the airflow rate

5.5 Airflow direction

User reference guide
34
INFORMATION
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
▪
The airflow rate in heating mode will lower to avoid generating cold airflow.
When temperature of the airflow rise, operation will continue at the set airflow
rate.
You can adjust the strength of the airflow coming out of the indoor unit.
Setting
Fan speed 1~5
~
Automatic
Indoor unit quiet
operation
INFORMATION
If the unit reaches the temperature setpoint:
▪
in cooling or automatic mode. Fan will stop operating.
▪
in heating mode. Fan will operate in low airflow rate.
1 Press to enter the airflow rate carousel menu. When
repeatedly, the mode will change as follows:
INFORMATION
▪
In the carousel menu, you can also navigate in both directions using
or and
▪
The carousel menu will always start with the currently active setting.
The airflow direction is the direction in which the indoor unit blows its air. It does
so by moving horizontal blades (flaps) or vertical blades (louvers). Adjust the
airflow direction as desired and in swing or in fixed position.
5 airflow rate levels from low to high.
The indoor unit adjusts its fan speed automatically
according to the setpoint and indoor temperature.
For reduction of noise coming from the indoor unit
(Example: at night)
.
Description
is pressed
Daikin room air conditioner
4P518786-9H – 2021.12
and
FTXJ-A(W)(S)(B)