Operation Mode And Temperature Setpoint - Daikin FTXJ20A2V1BW User Reference Manual

5 | Operation

5.3 Operation mode and temperature setpoint

User reference guide
32
Timer features
"5.11.2 OFF/ON timer
To automatically turn ON or OFF the system.
"5.11.3 Weekly timer
To automatically turn ON or OFF the system on a weekly basis.
Special features
"4.4.3 Wireless LAN
To operate the unit using smart devices
When. Adjust the system operation mode and set the temperature when you want
to:
▪ Heat up or cool down a room
▪ Blow air in a room without heating or cooling
▪ Decrease the humidity in a room
What. The system operates differently, depending on the user selection.
Setting
Automatic
Cooling
Heating
Fan only
Drying
Additional info:
▪ Outside temperature. The system's cooling or heating effect decreases when the
outside temperature is too high or too low.
▪ Defrost operation. During heating operation, frost might occur on the outdoor
unit and decrease the heating capacity. In that case, the system automatically
switches to defrosting operation to remove the frost. During defrosting
operation, hot air is NOT blown from the indoor unit.
4
operation" [
4
operation" [ 46]
4
connection" [ 21]
Description
The system cools down or heats up a room to the
temperature setpoint. It automatically switches
between cooling and heating if necessary.
The system cools down a room to the temperature
setpoint.
The system heats up a room to the temperature
setpoint.
Heat boost
This feature is automatic; it quickly heats up your home
when starting up the unit in heating mode.
The system only controls the airflow (airflow rate and
airflow direction).
During this operation you CANNOT set the temperature.
The system decreases the humidity in the room.
During this operation you CANNOT set the temperature.
44]
Daikin room air conditioner
4P518786-9H – 2021.12
FTXJ-A(W)(S)(B)