To Start/Stop Operation Mode And To Set The Temperature; Airflow Rate; To Adjust The Airflow Rate - Daikin CTXM15A2V1B User Reference Manual

6 | Operation

6.3.1 To start/stop operation mode and to set the temperature

6.4 Airflow rate

6.4.1 To adjust the airflow rate

User reference guide
24
1 Press one or more times to select the operation mode.
Result: The mode will be set as follows:
2 Press to start operation.
Result: and the selected mode are displayed on the LCD.
3 Press or one or more times to lower or raise the temperature.
Cooling operation Heating operation Automatic
18~32°C 10~30°C
Note: When using drying or fan only mode, you cannot adjust the temperature.
4 Press to stop operation.
Result: disappears from the LCD. The operation lamp goes off.
1 Press to choose:
5 airflow rate levels, from " " to " "
Automatic airflow rate operation
Indoor unit quiet operation. When the airflow rate is set to " ",
the noise from the unit will be reduced.
INFORMATION
▪
If the unit reaches the temperature setpoint in cooling or heating mode, the fan
will stop operating.
▪
When using drying operation mode, you CANNOT adjust the airflow rate setting.
1 Press to change the airflow setting as follows:
: Unit is operating.
: Operation mode = Automatic
: Operation mode = Drying
: Operation mode = Cooling
: Operation mode = Heating
: Operation mode = Fan only
: Shows the set temperature.
operation
18~30°C
Drying or Fan only
operation
—
CTXM-A, FTXM-A
Daikin room air conditioner
4P518786-12K – 2023.06