About Multi System; Priority Room Setting - Daikin FTXJ20A2V1BW User Reference Manual

5 | Operation

5.12 About Multi system

5.12.1 Priority room setting

When priority room setting is inactive or not present
User reference guide
48
7 Go to the minutes setting using
and in 10-minute intervals.
8 For OFF timer. Confirm the setting using
Result: The day of the week with 4 day entries is displayed. The new entry is
present in the entry list. The unit turns ON or OFF at the set time. The entry
list is sorted by time.
9 For ON timer, you can also set the temperature setpoint. Go to the
temperature setting using
Confirm the setting using
Result: The day of the week with 4 day entries is displayed. The new entry is
present in the entry list. The unit starts operating with the temperature
setpoint. The entry list is sorted by time.
INFORMATION
The temperature can be set between 10~32°C on the wireless remote control,
however:
▪
in cooling and automatic operation mode, the unit will operate at minimum 18°C,
even if is set to 10~17°C;
▪
in heating and automatic operation mode, the unit will operate at maximum
30°C, even if is set to 31~32°C.
Delete entry
1 To delete individual entries, change the setting to DEL and confirm using
Result: The day of the week with 4 day entries is displayed. The entry is
deleted. The day entry list is sorted by time.
In Multi system, 1 outdoor unit is connected to multiple indoor units. Example:
A B
C D
Priority room setting requires initial programming during installation. Please
consult your authorized dealer for assistance.
When more than 1 indoor unit is operating, priority is given to the first unit that
was turned on. Set other units to the same operation mode. Otherwise, they will
enter the standby mode, and the Daikin eye will flash (does NOT indicate
malfunction).
and change the minutes setting using
.
and change the setpoint using
.
and .
.
FTXJ-A(W)(S)(B)
Daikin room air conditioner
4P518786-9H – 2021.12