Daikin FTXJ20A2V1BW User Reference Manual page 24

4 | Before operation
To connect the wireless LAN to your home network
To connect using the WPS button
To connect using SSID and KEY number
User reference guide
24
The wireless adapter can be connected to your home network using the:
▪ WPS button (Wi-Fi Protected Setup) on the router (if present),
▪ The SSID (Service Set Identifier) and the KEY (password) - located on the unit.
1 In the indoor unit setting menu, navigate to the Wireless LAN connection
setting using and
2 Change the setting to ON using
Wireless LAN signal ON
Result: The connection animation is displayed on the screen for 5 seconds and the
wireless LAN status screen is displayed.
3 Continue setting using the WPS button or the SSID and KEY.
1 Navigate to WPS screen by
Result: The Daikin eye colour alternates between orange and partly green.
2 Press the WPS button on your communication device (e.g. router) within
approximately 1 minute. Refer to the manual of your communication device.
Result: If the connection was successful, the Daikin eye colour alternates between
blue and partly green.
INFORMATION
If the connection with your router is not possible, try procedure
SSID and KEY number" [
3 Press to exit to the home screen or use EXIT screen to return to "indoor
unit setting menu".
1 Open the ONECTA app on your smart device and follow the steps on the
screen.
2 Connect your smart device to the same home network as the unit.
3 Check if the connection was successful (refer to
connection status" [
4 Press to exit to the home screen or use EXIT screen to return to "indoor
unit setting menu".
. Press to enter the menu.
Wireless LAN connection setting
and . Press
and . Press
WPS setting
WPS
4 24].
4
25]).
to confirm your selection.
Wireless LAN signal OFF
to confirm selection.
"To connect using
"To confirm the wireless LAN
Daikin room air conditioner
4P518786-9H – 2021.12
FTXJ-A(W)(S)(B)