SG BODY REFLECTOR MUTING
4.4 VIBRATION DAMPERS
In case of applications with particularly strong vibrations, vibration dampers together with mounting brackets
are recommended to reduce the impact of the vibrations (see Figure 24).
4.5 MECHANICAL MUTING ARMS MOUNTING
To mount the Muting arms on both the "L" and "T" version, use the fixing bracket shown in Figure 26.
This fixing bracket guarantees the perfect alignment of the arms and the perpendicularity to the main unit.
Position the bracket on the main unit, after having mounted the arm or arms, as shown in Figure 27.
Verify the correct functioning position and block the group using the two plates and the screws and tightening
them with a CH.2.5 Allen key.
Figure 25
Figure 26
Figure 27
23