Minimum Installation Distance; Minimum Distance From Reflecting Surfaces - Datalogic SG4-RB2-050-OO-W Instruction Manual

SG BODY REFLECTOR MUTING

3.2.1 Minimum installation distance

Refer to paragraph 2.6.2 - Minimum installation distance.

3.2.2 Minimum distance from reflecting surfaces

Reflecting surfaces placed near the light beams of the safety device (over, under or laterally) can cause
passive reflections. These reflections can affect the recognition of an object inside the controlled area.
However, if the RX receiver detects a secondary beam (reflected by the side-reflecting surface) the object
might not be detected, even if the object interrupts the main beam.
ACTIVE
UNIT
ACTIVE
UNIT
Figure 13
Figure 14
15
PASSIVE
UNIT
PASSIVE
UNIT