Table of Contents
Advertisement
4.2 ROTATING BRACKETS
The rotating fixing has been improved and revised due to the size of the caps. It is possible to ensure a 360°
rotation around the dedicated cylindrical surfaces designed on the caps. To carry out this procedure, employ
the ST-5089, 4 mm thickness sheet metal with a special, dedicated shape. The screw to fix this bracket is
the same one used to fix the closing caps, with an M4 nut (see Figure 23).
4.3 BOTTOM FIXING BRACKETS
With the SG BODY series has been implemented a new kind of bracket fixing, by using the third groove, on
the bottom side of the housing, that allows to use whether the 90° bracket ST-5090 or the new ST-5093 and,
in both the cases, the same IM-5018 and screws seen before.
This kind of fixing is also very versatile in order to assembly the product into the new Protective Stands
mechanical armor.
The ST-5093 is a 4 mm thickness sheet metal as well. For further details and recommended mounting
positions see also paragraph 14.1.
Figure 23
Figure 24
22
Advertisement
Table of Contents
