Table of Contents
Advertisement
SETTING UPPER & LOWER LIMITS
Upper Limit
To set the upper limit, use the UP/DOWN buttons to move the table lift to your desired
max height position. Once it is at the desired position, press and hold the "M" until the
LED display flashes "S-" once, then release the button. Press and release the button two
more times in quick succession. The LED display should then show "999" on the third
press and then automatically return to the desired height. The upper limit is now set.
Lower Limit
To set the upper limit, use the UP/DOWN buttons to move the table lift to your desired
minimum height position. Once it is at the desired position, press and hold the "M" until
the LED display flashes "S-" once, then release the button. Press and release the button
two more times in quick succession. The LED display should then show "000" on the third
press and then automatically return to the desired height. The lower limit is now set.
Removing Limits
To remove the upper and lower limits, use the UP/DOWN buttons to move the desk to
any desired position. Press and hold the "M" button until the LED display flashes "S-"
once, then release the button. Press and release the button in succession until the display
changes to "555"(ignore any other readings). After a few seconds, the display will
automatically change back to the numbered height position. Upper and lower limits should
now be removed.
*After the upper and lower limits are set, the previous memory positions (1,2,3,4) may be
outside the new range of movement. If this happens, simply reset the memory positions.
*A Reset procedure requires the desk base to fully retract beyond any lower limit. Please
ensure you have proper clearance below the desk base.
*If you attempt to revise a previously set upper or lower limit and it is outside of the
existing range, you will need to remove the original upper/lower limits first.
HOW TO ORDER
1.800.676.6123
|
|
sales@progressiveautomations.com
www.progressiveautomations.com
Advertisement
Table of Contents
