Related Manuals for progressive automations FLt-08
Summary of Contents for progressive automations FLt-08
-
Page 1: Table Of Contents
FLT-08 User Manual Contents Caution/Liability Page 2 Technical Specifications Page 3 Parts Page 4 Page 5-6 Assembly Instructions Page 7 Operational/Reset Procedure, Troubleshooting Dimensions Page 8... -
Page 2: Caution/Liability
Caution Liability... -
Page 3: Technical Specifications
Technical Specifications Input Voltage 120 VAC, 60 Hz Output Voltage 24 VDC Stroke 25.5" Weight Capacity 220 lbs per set Speed 1.5"/sec Height Range 23.5” - 49” (without table top) Duty Cycle 10% Max. 2 mins on, 18 mins off Material Steel Certification... -
Page 4: Parts
Parts Side Bracket Frame 1 Center Rail Frame 2 (Right) (Left) Cable Tray Foot Caster Control Box Beam Screen Holder Cover M8x12 Machine M6x14 Machine M6x10 Machine ST5x20 Wood St5x116 Wood Cable Tray Screw Screw Screw Screw Screw Cable Handset Power Cord Cable Clip... -
Page 5: Assembly Instructions
Assembly Instructions STEP 3 STEP 1 Use 16 of the M6x10 Machine Screws (16) to attach the Prepare the four legs (5 & 6) as shown in the Frames to the Legs. Put the Center Rails (3) into the Frames picture below. - Page 6 Assembly Instructions STEP 5 (optional) STEP 7 Insert four of the M6x10 Machine Screws into the holes of Use 24 of the M6x10 Machine Screws to the Beams then assemble the Cable Tray as shown in the attach the Center Rails to the Frames and to picture below.
-
Page 7: Operational/Reset Procedure
Operational Procedure Once your table lift is installed, operation is simple. Using the wired remote will allow full control over extending and retracting the lift columns. Use the up button to raise the table lift and the down button to lower the table lift. You can program up to 4 locations using the memory setup: Use the up/down buttons on the remote to find your desired height(s), then press “M”... -
Page 8: Dimensions
Dimensions 25.5" 23.5" 55.3" with Cable Tray 34.4"...
Need help?
Do you have a question about the FLt-08 and is the answer not in the manual?
Questions and answers