Table of Contents
Advertisement
4.
Setup
4.3 Unpacking andinstallation
1
2
3
7
14
4
5
6
8
Fig. 7
• Open the crate.
• Remove all accessories (1) and the instruc-
tion manual.
• Remove Allen key, size 8 and set aside.
• Remove cardboard tray (2).
• Remove cushioning material.
• Remove cardboard cover (3).
• Use the two straps (4) attached to the front
and back of the wooden pallet to remove the
instrument from the crate.
For transport, do not grab the instru-
ment neither by the handles of the
handwheel or coarse feed wheel nor
by the section thickness adjusting
knob.
• Place wood pallet with instrument onto a
stable bench.
• Grasp the front edge of the pallet and lift it
slightly.
• Use size-8 Allen key (7) to remove the secur-
ing bolt (6) and washer located underneath
the pallet.
• Cut open plastic cover (5) and remove.
• Grasp front and rear edge of instrument
base plate and lift instrument from pallet.
• Place instrument on stable laboratory bench.
Two sliders (8) attached to the base plate
make it easier to move the instrument on the
bench.
• To reposition the instrument, grasp the front
edge of the base plate, lift the instrument
slightly and slide it into the desired position.
Instruction manual V 2.3 – 02/2009
Advertisement
Table of Contents
