4.
Setup
4.5 Fastening the specimen clamp directly to the fixture
10
14
16
18
17
12
16
To do so, proceed as follows:
• Move fixture (10) to uppermost position
• Remove dovetail clamping device (14) from
13
• Remove the two screws (17) (use Allen key
12
• Set specimen clamp (12) onto fixture for
Fig. 9
The specimen clamps (standard or
universal cassette clamp) can also be
fastened directly to the fixture (with-
out dovetail clamping system).
(turning the handwheel) and activate the
handwheel locking mechanism.
the fixture
(Fig.
9.1).
To do so, loosen the four screws (16) with an
Allen key size 3 (18) and remove them.
size 3) in order to detach the dovetail tenon
(13) from the specimen clamp (12)
specimen clamps (see
with two screws (17).
Instruction manual V 2.3 – 02/2009
(Fig.
9.2).
Fig.
9.3) and fasten