Rigging Procedures; Flying 5Xt - L-Acoustics 5XT Owner's Manual

Rigging procedures

Flying 5XT

type of deployment
rigging accessories
additional material
tools
Fasteners for ceiling-mounting.
Select screw length and anchors applicable to the ceiling properties.
Assembly
Procedure
1. On both sides of the enclosure, remove the screws.
2. Secure the ETR5 to the wall or the ceiling using two ∅ 10 mm/M10 screws.
3. Position the enclosure inside the ETR5 bracket.
5XT owner's manual (EN) version 4.0
wall-mounting
ceiling-mounting
ETR5
2 x ∅ 10 mm / M10 screws and anchors (depending on the support material)
torque screwdriver
T30 Torx bit
T30
Rigging procedures
25