Rigging Procedures; Wall-Mounting And Ceiling-Mounting; Mounting On X-Us8 Or X-Ul8 - L-Acoustics X8 Owner's Manual

Rigging procedures

Wall-mounting and ceiling-mounting

Mounting on X-US8 or X-UL8

type of deployment
rigging accessories
additional material
min number of operators
Additional safety for own arrays
When ying an enclosure, use the M8 DIN580 threaded insert to implement a secondary safety.
Ceiling-mounting
Additional holes on the short U-bracket can be used for optimal visual impact.
In this case, the rigging procedure will require 2 operators.
Short U-bracket in horizontal position
In this position, the enclosure applies a diagonal force of 179 daN on the anchoring points.
Fasteners for wall-mounting or ceiling-mounting
Secure the bracket with three M10 screws.
Select screw length and anchors applicable to the wall or ceiling properties.
The procedure is shown with X-UL8 in horizontal position.
The same procedure applies for X-UL8 in vertical position or in ceiling-mounting conguration and X-US8 in
horizontal or vertical position or in ceiling-mounting conguration.
Assembly
Procedure
1. Drive the knobs in the inserts on the enclosure.
Stop when the threading is halfway in.
X8 owner's manual (EN) version 1.0
wall-mounting
ceiling-mounting
X-US8 or X-UL8
3 × M10 screws and anchors
electric screwdriver
1 or 2
Rigging procedures
37