Introduction; 5Xt Ultra Compact Enclosure - L-Acoustics 5XT Owner's Manual

Introduction

Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Risk of tipping
Remove all rigging accessories before transporting a product or an assembly.
Take into account the wind effects on dynamic load.
When a loudspeaker assembly is deployed in an open air environment, wind can produce dynamic stress to the
rigging components and suspension points.
If the wind force exceeds 6 bft (Beaufort scale), lower down and/or secure the product or the assembly.
Intended use
This system is intended for use by trained personnel for professional applications.
As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right
to change the specications of its products and the content of its documents without prior
notice.
Check www.l-acoustics.com
Long term exposure to extreme conditions may damage the product.
For more information, refer to the Products weather protection document, available on the website.
Read the maintenance section of this document before servicing the product.
Contact L-Acoustics for advanced maintenance.
Any unauthorized maintenance operation will void the product warranty.
This marking indicates that this product should not be disposed of with other household waste throughout the
EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased. They can take this product
for environmentally safe recycling.
Introduction

5XT ultra compact enclosure

6
on a regular basis to download the latest document and software updates.
5XT is an ultra-compact coaxial system designed for short
throw sound reinforcement applications requiring minimum
visual impact.
5XT features a 1" diaphragm compression driver coaxially
loaded by a 5" low-mid frequency transducer mounted
in a bassreex cabinet. 5XT operates from 95 Hz to
20 kHz. The coaxial transducer arrangement produces a
110° axisymmetric directivity output with a smooth tonal
response free of secondary lobes over the entire frequency
range.
The internal passive crossover network uses custom lters.
The L-Acoustics amplied controllers L-Drive parameters
ensure the linearization and protection of the transducers.
5XT owner's manual (EN) version 4.0