Rigging procedures
Tools
Before rigging this product, make sure all the tools listed are available. References are given for FACOM
table. Other manufacturers can be used.
name
set of 6-point 1/4" sockets
torque screwdriver (2 - 10 N.m)
Wall-mounting with Soka-onW
type of deployment
rigging accessories
additional material
tools
min. number of operators
Fasteners for wall-mounting
Secure the rigging element with four round or pan head M6 screws.
Select screw length and anchors applicable to the wall properties.
Soka owner's manual (EN) version 1.0
reference
RL.NANO1 / R.360NANO
A.404
wall-mounting
Soka-onW, including:
• 2 surface-mounting plates
• 2 M6x35 Torx screws
• 2 silent blocks
• 4 spacers
4 compatible screws and anchors
torque screwdriver
T30 Torx bit
T20 Torx bit
1
Rigging procedures
®
products in this
distributor
FACOM
FACOM
23