Regular Safety Checks - Assa Abloy SW200 Owner's Manual

Regular safety checks

To help you fulfil the national/international requirements and to avoid malfunction and risk for injuries,
we have provided the following checklist.
Do not use if repair or adjustment is necessary.
Activate your operator and check visually, fastening and any damage of
operator 1
arm system 2
position switch
3
hinges 4
door and glass 5
Also inspect your operator and check visually for
sharp edges on the door leaf and door frame (if any)
condition of door seals
finger protection 8
pivot
13
and finally that the complete door runs properly and closes slowly in a smooth way
Set the programme selector in OFF mode and check that the operator and lock work together. Also check
that the lock really secures the door
Activate the manual activation units
sufficiently while you pass the entrance/exit.
Then proceed with the automatic activation units
Check the non-monitored safety sensors
The door must not hit you when opening nor when closing. If you are unsure of which type of sensor you
have, please contact your ASSA ABLOY representative.
Escape
doors
Fire doors
See page 10 for more information about safety checks.
= Contact your ASSA ABLOY representative. For contact information, see last page.
= Take appropriate measures.
8
Daily Action
7
9
.
10
if any, and walk towards the door. Check that the door has opened
11
in the same way.
12
if any, by standing in the swing path and activate the operator.
Set the programme selector in AUTO mode. Push the door manually in es-
cape direction and make sure that no object or function will prevent the
door from opening. Also make sure the escape route is free for use.
Let the door close after an impulse and make sure that no object will prevent
the door from closing and locking (if demanded).
Issue 2018-03-28
6
If problem oc-
curs
1007717-en-US-3.0