Pole-Mounting X4I - L-Acoustics X4i Owner's Manual

Rigging procedures

Pole-mounting X4i

type of development
rigging accessory
tools
Adapter for US microphone stand
Use a 3/8"-16 male to 5/8"-27 female microphone screw adapter and a locking ring to mount X4i on a US
standard microphone stand.
The procedure is shown with X-U4i.
The same procedure applies for X-B4i.
Assembly
Procedure
1. Secure the microphone stand to X-U4i or X-B4i with the locking ring.
2. On both sides of the enclosure, remove the screws.
Risk of injury
Keep ngers away from the contact area between the bracket and the enclosure.
3. Position the enclosure inside X-U4i or X-B4i.
With X-U4i, select the holes on the bracket to adjust the distance between X4i and the microphone stand.
34
pole-mounting
X-U4i or X-B4i
microphone stand
torque screwdriver
T25 Torx bit
T25
X4i owner's manual (EN) version 4.0