Introduction; How To Use This Manual; X4I Miniature Enclosure - L-Acoustics X4i Owner's Manual

Introduction

How to use this manual

The X4i owner's manual is intended for all actors involved in the system design, implementation, preventive and
corrective maintenance of the X4i system. It must be used as follows:
1. Read the technical description for an overview of all system elements, their features, and their compatibilities.
• Electro-acoustical description
• Rigging system description
2. Prepare the system conguration. Consider the mechanical limits and the available acoustical congurations.
• Mechanical safety
• Loudspeaker congurations
3. Before rigging the system, perform mandatory inspections and functional checks.
• Inspection and preventive maintenance
4. To deploy the system, follow the step-by-step rigging instructions and refer to the cabling schemes.
• Rigging procedures
• Connection to LA amplied controllers
The Corrective maintenance
Performing another operation exposes to hazardous situations.
For advanced maintenance, contact your L-Acoustics representative.
As part of a continuous evolution of techniques and standards, L-Acoustics reserves the right to
change the specications of its products and the content of its document without prior notice. Please
check www.l-acoustics.com
Contact information
For information on advanced corrective maintenance:
• contact your Certied Provider or your L-Acoustics representative
• for Certied Providers, contact the L-Acoustics customer service:
laus.service@l-acoustics.com

X4i miniature enclosure

X4i owner's manual (EN) version 4.0
(p.11)
(p.13)
(p.18)
(p.19)
(p.25)
(p.32)
(p.36)
(p.37) section contains the operations authorized for the end user.
on a regular basis to download the latest document and software updates.
(Americas).
X4i is an installation-specic miniature coaxial system designed for
short throw applications requiring seamless integration in the smallest
spaces.
X4i features a 1.4" diaphragm compression driver coaxially loaded
by a 4" neodymium low-mid frequency transducer mounted in a closed
cabinet. X4i operates from 120 Hz to 20 kHz and delivers a peak
SPL of 116 dB. The coaxial transducer arrangement produces a 110°
axisymmetric directivity with a smooth tonal response free of secondary
lobes over the entire frequency range.
The internal passive crossover network uses custom lters. The
L-Acoustics amplied controllers L-Drive parameters ensure the
linearization and protection of the transducers.
customer.service@l-acoustics.com
Introduction
(EMEA/APAC),
7