Pole-mounting Syva
type of deployment
rigging accessories
tools
additional material
min number of operators
Procedure
1. Remove the backplate from Syva and secure Syva Pole on Syva.
Store plates and unused screws in Syva Cov.
2. Mount the assembly on a pole.
3. Tighten the locking knob and the nut.
Syva owner's manual (EN) version 1.0
T30
pole-mount
Syva Pole
torque screwdriver
15 mm (5.9 in) screwdriver extension
T30 Torx bit
17 mm wrench
35 mm pole mount
1
150 mm /
17 mm
Rigging procedures
5 N.m
T30
5.9 in
49